Vol 3 No 6 (2011): Physics and physical computing / Fizika ir fizinė kompiuterija
Published: 2012-01-03
Article
Efficiency research on meat industry waste water treatment applying the method of dissolved air flotation
Abstract 461 | PDF Downloads 480 | DOI https://doi.org/10.3846/mla.2011.100
Page 5-7
Damping transversal vibrations of the offset cylinder of the offset press
Abstract 468 | PDF Downloads 376 | DOI https://doi.org/10.3846/mla.2011.101
Page 8-11
Research on the quality of figure cutting
Abstract 438 | PDF Downloads 269 | DOI https://doi.org/10.3846/mla.2011.102
Page 12-14
Research on the accuracy of angle measurement
Abstract 434 | PDF Downloads 346 | DOI https://doi.org/10.3846/mla.2011.103
Page 15-18
The utilization of the creativity of engineering personnel in industrial
Abstract 450 | PDF Downloads 487 | DOI https://doi.org/10.3846/mla.2011.104
Page 19-24
Research into automobile movement on a curve under winter conditions
Abstract 463 | PDF Downloads 497 | DOI https://doi.org/10.3846/mla.2011.105
Page 25-28
Metallographic investigation into the aluminothermic welding of rail joint R65
Abstract 442 | PDF Downloads 381 | DOI https://doi.org/10.3846/mla.2011.106
Page 29-33
Investigation into the structure and corrosion resistance of Mg-Al and Mg-Al-Zr coatings produced by magnetron sputtering
Abstract 466 | PDF Downloads 299 | DOI https://doi.org/10.3846/mla.2011.107
Page 34-38
Analysis of a flat-plate solar collector
Abstract 705 | PDF Downloads 587 | DOI https://doi.org/10.3846/mla.2011.108
Page 39-43
Investigation into the quality of UV varnishing
Abstract 429 | PDF Downloads 357 | DOI https://doi.org/10.3846/mla.2011.109
Page 44-46
Multi-objective optimization of grillages applying the genetic algorithm
Abstract 435 | PDF Downloads 356 | DOI https://doi.org/10.3846/mla.2011.110
Page 47-52
Research and formation of the whirling vortex of the jet pump
Abstract 453 | PDF Downloads 328 | DOI https://doi.org/10.3846/mla.2011.111
Page 53-55
Investigation into negative-stiffness vibroisolation table “Minus K 500BM-1”
Abstract 420 | PDF Downloads 269 | DOI https://doi.org/10.3846/mla.2011.112
Page 56-60
An increase in the competitiveness of industrial enterprises in the process of developing innovation practices
Abstract 461 | PDF Downloads 306 | DOI https://doi.org/10.3846/mla.2011.113
Page 61-66
Some inaccurate uses in papers on welding
Abstract 425 | PDF Downloads 1038 | DOI https://doi.org/10.3846/mla.2011.114
Page 67-70
Investigation into tt technological properties of coolants with liquid crystal additives
Abstract 444 | PDF Downloads 317 | DOI https://doi.org/10.3846/mla.2011.115
Page 71-74
Research into thermal sprayed coatings with ultrasonic methods
Abstract 445 | PDF Downloads 306 | DOI https://doi.org/10.3846/mla.2011.116
Page 75-78
Numerical modeling of a precise dual axis positioning system
Abstract 479 | PDF Downloads 298 | DOI https://doi.org/10.3846/mla.2011.117
Page 79-81
Research on the effectiveness of cleaning cutting fluid used for machining during abrasive and diamond tools operations
Abstract 487 | PDF Downloads 314 | DOI https://doi.org/10.3846/mla.2011.118
Page 82-84
Metalų oksidų ir jų mišinių panaudojimas kintamo lūžio rodiklio optinėms dangoms formuoti
Abstract 520 | PDF Downloads 940 | DOI https://doi.org/10.3846/mla.2011.119
Page 85-90
Control over the performance of monocrystalline silicon solar cells referring to the porous silicon layer
Abstract 456 | PDF Downloads 525 | DOI https://doi.org/10.3846/mla.2011.120
Page 91-94
Effects of thermodynamical processes on radiocesium behavior in lake tapeliai
Abstract 446 | PDF Downloads 395 | DOI https://doi.org/10.3846/mla.2011.121
Page 95-100
Investigation into superconducting Y-Ba-Cu-O films containing regions of weak superconductivity and biased at I >> IC
Abstract 425 | PDF Downloads 345 | DOI https://doi.org/10.3846/mla.2011.122
Page 101-104
Coherent vortex motion in Yba2cu3o7-Z superconducting thin films containing Π-shaped channel for easy vortex motion biased at I ~ IC
Abstract 451 | PDF Downloads 334 | DOI https://doi.org/10.3846/mla.2011.123
Page 105-110