Scheduling repetitive construction projects: structured literature review
Abstract
Construction projects that involve repetitive operations are often referred to as repetitive construction projects. Scheduling them proves a task more demanding than in the case of projects in other industries. Typical objectives of optimization, a characteristic set of constraints, as well as the schedule’s susceptibility to the propagation of disruptions caused by materializing risks, call for specific scheduling methods. The authors review the literature to summarize the existing repetitive scheduling methods and put forward their classification to identify the method’s aspects needing refinement. This is done to point to directions of further research. The authors hope that this study will contribute to better identification of existing problems in planning repetitive construction projects and faster development of decision support systems, eagerly anticipated by the construction practitioners. Though the focus is on applications to construction projects, the repetitive scheduling methods that account for volatile operating conditions may be of interest to researchers who develop planning techniques for other industries.
Keyword : construction project management, construction project planning, construction project scheduling, project management, project schedules, repetitive construction projects
How to Cite
Tomczak, M., & Jaśkowski, P. (2022). Scheduling repetitive construction projects: structured literature review. Journal of Civil Engineering and Management, 28(6), 422–442. https://doi.org/10.3846/jcem.2022.16943
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Abbasnezhad, K., Ansari, R., & Mahdikhani, M. (2020). Schedule risk assessments using a precedence network: An object-oriented Bayesian approach. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 46, 1737–1753. https://doi.org/10.1007/s40996-020-00550-2
Abd El Razek, R. H., Diab, A. M., Hafez, S. M., & Aziz, R. F. (2010). Time-cost-quality trade-off software by using simplified Genetic algorithm for typical-repetitive construction projects. International Journal of Civil and Environmental Engineering, 4(1), 22–31.
Abdallah, M., & Marzouk, M. (2013). Planning of tunneling projects using computer simulation and fuzzy decision making. Journal of Civil Engineering and Management, 19(4), 591–607. https://doi.org/10.3846/13923730.2013.793608
Abdallah, M., & Alshahri, A. (2019). Optimizing planning of build–operate–transfer projects to maximize investor profit. Canadian Journal of Civil Engineering, 46(1), 26–37. https://doi.org/10.1139/cjce-2017-0327
Adeli, H., & Karim, A. (1997). Scheduling/cost optimization and neural dynamics model for construction. Journal of Construction Engineering and Management, 123(4), 450–458. https://doi.org/10.1061/(ASCE)0733-9364(1997)123:4(450)
Agrama, F. A. E. M. (2011). Linear projects scheduling using spreadsheets features. Alexandria Engineering Journal, 50(2), 179–185. https://doi.org/10.1016/j.aej.2011.01.018
Agrama, F. A. E. M. (2014). Multi-objective genetic optimization for scheduling a multi-storey building. Automation in Construction, 44, 119–128. https://doi.org/10.1016/j.autcon.2014.04.005
Ali, M. M., & Elazouni, A. (2009). Finance-based CPM/LOB scheduling of projects with repetitive non-serial activities. Construction Management and Economics, 27(9), 839–856. https://doi.org/10.1080/01446190903191764
Altuwaim, A., & El-Rayes, K. (2018a). Minimizing duration and crew work interruptions of repetitive construction projects. Automation in Construction, 88, 59–72. https://doi.org/10.1016/j.autcon.2017.12.024
Altuwaim, A., & El-Rayes, K. (2018b). Optimizing the scheduling of repetitive construction to minimize interruption cost. Journal of Construction Engineering and Management, 144(7), 04018051. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001510
Ammar, M. A. (2003). Float analysis of non-serial repetitive activities. Construction Management and Economics, 21(5), 535–542. https://doi.org/10.1080/0144619032000073523
Ammar, M. A. (2013). LOB and CPM integrated method for scheduling repetitive projects. Journal of Construction Engineering and Management, 139(1), 44–50. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000569
Ammar, M. A. (2020). Resource optimisation in line of balance scheduling. Construction Management and Economics, 38(8), 715–725. https://doi.org/10.1080/01446193.2019.1606924
Ammar, M. A. (2022). Optimization of line of balance scheduling considering work interruption. International Journal of Construction Management, 22(2), 305–316. https://doi.org/10.1080/15623599.2019.1624003
Ammar, M. A., & Abdel-Maged, A. F. (2018). Modeling of LOB scheduling with learning development effect. International Journal of Construction Management, 18(6), 517–526. https://doi.org/10.1080/15623599.2017.1357350
Arabpour Roghabadi, M., & Moselhi, O. (2021). Optimized crew selection for scheduling of repetitive projects. Engineering, Construction and Architectural Management, 28(6), 1517–1540. https://doi.org/10.1108/ECAM-10-2019-0590
Arditi, D., & Albulak, M. Z. (1986). Line-of-Balance scheduling in pavement construction. Journal of Construction Engineering and Management, 112(3), 411–424. https://doi.org/10.1061/(ASCE)0733-9364(1986)112:3(411)
Arditi, D., Tokdemir, O. B., & Suh, K. (2001). Scheduling system for repetitive unit construction using line-of-balance technology. Engineering, Construction and Architectural Management, 8(2), 90–103. https://doi.org/10.1108/eb021173
Arditi, D., Tokdemir, O. B., & Suh, K. (2002a). Challenges in line-of-balance scheduling. Journal of Construction Engineering and Management, 128(6), 545–556. https://doi.org/10.1061/(ASCE)0733-9364(2002)128:6(545)
Arditi, D., Sikangwan, P., & Tokdemir, O. B. (2002b). Scheduling system for high rise building construction. Construction Management and Economics, 20(4), 353–364. https://doi.org/10.1080/01446190210131647
Bakry, I., Moselhi, O., & Zayed, T. (2014). Optimized acceleration of repetitive construction projects. Automation in Construction, 39, 145–151. https://doi.org/10.1016/j.autcon.2013.07.003
Bakry, I., Moselhi, O., & Zayed, T. (2016). Optimized scheduling and buffering of repetitive construction projects under uncertainty. Engineering, Construction and Architectural Management, 23(6), 782–800. https://doi.org/10.1108/ECAM-05-2014-0069
Baqerin, M. H., Shafahi, Y., & Kashani, H. (2016). Application of Weibull analysis to evaluate and forecast schedule performance in repetitive projects. Journal of Construction Engineering and Management, 142(2), 04015058. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001040
Biruk, S., & Jaśkowski, P. (2008). Simulation modelling construction project with repetitive tasks using Petri nets theory. Journal of Business Economics and Management, 9(3), 219–226. https://doi.org/10.3846/1611-1699.2008.9.219-226
Biruk, S., & Jaśkowski, P. (2009). The work continuity constraints problem in construction projects, network models. Archives of Civil Engineering, 55(1), 29–41.
Biruk, S., & Rzepecki, Ł. (2017). Wpływ zjawiska uczenia siȩ i zapominania na czas realizacji powtarzalnych procesów budowlanych realizowanych w warunkach losowyc [The impact of learning-forgetting phenomenon on duration of repetitive construction processes conducted in random conditions]. Scientific Review Engineering and Environmental Sciences, 26(2), 202–209. https://doi.org/10.22630/PNIKS.2017.26.2.18
Bonnal, P., Gourc, D., Hameri, A.-P., & Lacoste, G. (2005). A linear-discrete scheduling model for the resource-constrained project scheduling problem. Construction Management and Economics, 23(8), 797–814. https://doi.org/10.1080/01446190500040869
Bonnal, P., Baudin, M., & De Jonghe, J. (2013). Merging PDM, RSM and LSM scheduling approaches: Into a single construction project scheduling system. Journal of Modern Project Management, 1(2), 6–17.
Bożejko, W., Hejducki, Z., & Wodecki, M. (2012). Applying metaheuristic strategies in construction projects management. Journal of Civil Engineering and Management, 18(5), 621–630. https://doi.org/10.3846/13923730.2012.719837
Bożejko, W., Hejducki, Z., Uchroński, M., & Wodecki, M. (2014). Solving resource-constrained construction scheduling problems with overlaps by metaheuristic. Journal of Civil Engineering and Management, 20(5), 649–659. https://doi.org/10.3846/13923730.2014.906496
Cheng, T.-M., Feng, C.-W., & Chen, Y.-L. (2005). A hybrid mechanism for optimizing construction simulation models. Automation in Construction, 14(1), 85–98. https://doi.org/10.1016/j.autcon.2004.07.014
Cho, K., Hong, T., & Hyun, C. (2010). Integrated schedule and cost model for repetitive construction process. Journal of Management in Engineering, 26(2), 78–88. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000009
Cho, K., Hong, T., & Hyun, C. (2011). Scheduling model for repetitive construction processes for high-rise buildings. Canadian Journal of Civil Engineering, 38(1), 36–48. https://doi.org/10.1139/L10-108
Cho, K., Hong, T., & Hyun, C. (2013). Space zoning concept-based scheduling model for repetitive construction process. Journal of Civil Engineering and Management, 19(3), 409–421. https://doi.org/10.3846/13923730.2012.757561
Chrzanowski, E. N., & Johnston, D. W. (1986). Application of linear scheduling. Journal of Construction Engineering and Management, 112(4), 476–491. https://doi.org/10.1061/(ASCE)0733-9364(1986)112:4(476)
Cole, L. J. R. (1991). Construction scheduling: Principles, practices, and six case studies. Journal of Construction Engineering and Management, 117(4), 579–588. https://doi.org/10.1061/(ASCE)0733-9364(1991)117:4(579)
Couto, J. P., & Teixeira, J. C. (2005). Using linear model for learning curve effect on highrise floor construction. Construction Management and Economics, 23(4), 355–364. https://doi.org/10.1080/01446190500040505
Damci, A. (2020). Revisiting the concept of natural rhythm of production in line of balance scheduling. International Journal of Construction Management. https://doi.org/10.1080/15623599.2020.1786764
Damci, A., Arditi, D., & Polat, G. (2013a). Multiresource leveling in line-of-balance scheduling. Journal of Construction Engineering and Management, 139(9), 1108–1116. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000716
Damci, A., Arditi, D., & Polat, G. (2013b). Resource leveling in line-of-balance scheduling. Computer-Aided Civil and Infrastructure Engineering, 28(9), 679–692. https://doi.org/10.1111/mice.12038
de Araújo, M. C. B., Alencar, L. H., & de Miranda Mota, C. M. (2017). Project procurement management: A structured literature review. International Journal of Project Management, 35(3), 353–377. https://doi.org/10.1016/j.ijproman.2017.01.008
Dhanasekar, M. (2000). Identification of optimal size resources for a repetitive housing construction. Engineering, Construction and Architectural Management, 7(4), 347–361. https://doi.org/10.1108/eb021158
Duffy, G. A., Oberlender, G. D., & Jeong, D. H. S. (2011). Linear scheduling model with varying production rates. Journal of Construction Engineering and Management, 137(8), 574–582. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000320
Duffy, G., Woldesenbet, A., Jeong, D. H. S., & Oberlender, G. D.
(2012). Advanced linear scheduling program with varying production rates for pipeline construction projects. Automation in Construction, 27, 99–110. https://doi.org/10.1016/j.autcon.2012.05.014
Dzeng, R. J., Wang, W. C., & Tserng, H. P. (2004). Module-based construction schedule administration for public infrastructure agencies. Journal of Construction Engineering and Management, 130(1), 5–14. https://doi.org/10.1061/(ASCE)0733-9364(2004)130:1(5)
Eid, M. S., Elbeltagi, E. E., & El-Adaway, I. H. (2021). Simultaneous multi-criteria optimization for scheduling linear infrastructure projects. International Journal of Construction Management, 21(1), 41–55. https://doi.org/10.1080/15623599.2018.1505027
Eiris Pereira, R., & Flood, I. (2017). Impact of linear correlation on construction project performance using stochastic linear scheduling. Visualization in Engineering, 5, 8. https://doi.org/10.1186/s40327-017-0045-2
El-Rayes, K. (2001). Object-oriented model for repetitive construction scheduling. Journal of Construction Engineering and Management, 127(3), 199–205. https://doi.org/10.1061/(ASCE)0733-9364(2001)127:3(199)
El-Rayes, K., & Moselhi, O. (1998). Resource-driven scheduling of repetitive activities. Construction Management and Economics, 16(4), 433–446. https://doi.org/10.1080/014461998372213
El-Rayes, K., & Moselhi, O. (2001). Optimizing resource utilization for repetitive construction projects. Journal of Construction Engineering and Management, 127(1), 18–26. https://doi.org/10.1061/(ASCE)0733-9364(2001)127:1(18)
El-Rayes, K., Ramanathan, R., & Moselhi, O. (2002). An object-oriented model for planning and control of housing construction. Construction Management and Economics, 20(3), 201–210. https://doi.org/10.1080/01446190110115312
Elhakeem, A., & Hegazy, T. (2005). Graphical approach for manpower planning in infrastructure networks. Journal of Construction Engineering and Management, 131(2), 168–175. https://doi.org/10.1061/(ASCE)0733-9364(2005)131:2(168)
Ezeldin, A. S., & Soliman, A. (2009). Hybrid time-cost optimization of nonserial repetitive construction projects. Journal of Construction Engineering and Management, 135(1), 42–55. https://doi.org/10.1061/(ASCE)0733-9364(2009)135:1(42)
Fan, S.-L., & Tserng, H. P. (2006). Object-oriented scheduling for repetitive projects with soft logics. Journal of Construction Engineering and Management, 132(1), 35–48. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:1(35)
Fan, S.-L., Sun, K.-S., & Wang, Y.-R. (2012). GA optimization model for repetitive projects with soft logic. Automation in Construction, 21(1), 253–261. https://doi.org/10.1016/j.autcon.2011.06.009
García-Nieves, J. D. D., Ponz-Tienda, J. L. L., Salcedo-Bernal, A., & Pellicer, E. (2018). The multimode resource-constrained project scheduling problem for repetitive activities in construction projects. Computer-Aided Civil and Infrastructure Engineering, 33(8), 655–671. https://doi.org/10.1111/mice.12356
García-Nieves, J. D. D., Ponz-Tienda, J. L. L., Ospina-Alvarado, A., & Bonilla-Palacios, M. (2019). Multipurpose linear programming optimization model for repetitive activities scheduling in construction projects. Automation in Construction, 105, 102799. https://doi.org/10.1016/j.autcon.2019.03.020
Georgy, M. E. (2008). Evolutionary resource scheduler for linear projects. Automation in Construction, 17(5), 573–583. https://doi.org/10.1016/j.autcon.2007.10.005
González, V., Alarcón, L. F., & Molenaar, K. (2009). Multiobjective design of Work-In-Process buffer for scheduling repetitive building projects. Automation in Construction, 18(2), 95–108. https://doi.org/10.1016/j.autcon.2008.05.005
Gouda, A., Hosny, O., & Nassar, K. (2017). Optimal crew routing for linear repetitive projects using graph theory. Automation in Construction, 81, 411–421. https://doi.org/10.1016/j.autcon.2017.03.007
Hafez, S. M. (2004). Practical limitations of line-of-balance in scheduling repetitive construction units. Alexandria Engineering Journal, 43(5), 653–661.
Hafez, S. M. (2005). Developing classical schedule technology. Alexandria Engineering Journal, 44(2), 267–277.
Hajdasz, M. (2014). Flexible management of repetitive construction processes by an intelligent support system. Expert Systems with Applications, 41(4, Part 1), 962–973. https://doi.org/10.1016/j.eswa.2013.06.063
Han, S., Lee, S., & Peña-Mora, F. (2012). Identification and quantification of non-value-adding effort from errors and changes in design and construction projects. Journal of Construction Engineering and Management, 138(1), 98–109. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000406
Handa, V. K., & Barcia, R. M. (1986). Linear scheduling using optimal control theory. Journal of Construction Engineering and Management, 112(3), 387–393. https://doi.org/10.1061/(asce)0733-9364(1986)112:3(387)
Harmelink, D. J. (2001). Linear scheduling model: Float characteristics. Journal of Construction Engineering and Management, 127(4), 255–260. https://doi.org/10.1061/(asce)0733-9364(2001)127:4(255)
Harmelink, D. J., & Rowings, J. E. (1998). Linear scheduling model: Development of controlling activity path. Journal of Construction Engineering and Management, 124(4), 263–268. https://doi.org/10.1061/(ASCE)0733-9364(1998)124:4(263)
Harris, R. B., & Ioannou, P. G. (1998). Scheduling projects with repeating activities. Journal of Construction Engineering and Management, 124(4), 269–278. https://doi.org/10.1061/(ASCE)0733-9364(1998)124:4(269)
Hassan, A., & El-Rayes, K. (2020). Quantifying the interruption impact of activity delays in non-serial repetitive construction projects. Construction Management and Economics, 38(6), 515–533. https://doi.org/10.1080/01446193.2019.1657922
Hassan, A., El-Rayes, K., & Attalla, M. (2021). Optimizing the scheduling of crew deployments in repetitive construction projects under uncertainty. Engineering, Construction and Architectural Management, 28(6), 1615–1634. https://doi.org/10.1108/ECAM-05-2020-0304
Hassanein, A., & Moselhi, O. (2004). Planning and scheduling highway construction. Journal of Construction Engineering and Management, 130(5), 638–646. https://doi.org/10.1061/(ASCE)0733-9364(2004)130:5(638)
Hassanein, A., & Moselhi, O. (2005). Accelerating linear projects. Construction Management and Economics, 23(4), 377–385. https://doi.org/10.1080/01446190410001673571
Hegazy, T. (2001). Critical path method-line of balance model for efficient scheduling of repetitive construction projects. Transportation Research Record: Journal of the Transportation Research Board, 1761(1), 124–129. https://doi.org/10.3141/1761-16
Hegazy, T., & Wassef, N. (2001). Cost optimization in projects with repetitive nonserial activities. Journal of Construction Engineering and Management, 127(3), 183–191. https://doi.org/10.1061/(ASCE)0733-9364(2001)127:3(183)
Hegazy, T., & Kamarah, E. (2008). Efficient repetitive scheduling for high-rise construction. Journal of Construction Engineering and Management, 134(4), 253–264. https://doi.org/10.1061/(ASCE)0733-9364(2008)134:4(253)
Hegazy, T., Elhakeem, A., & Elbeltagi, E. (2004). Distributed scheduling model for infrastructure networks. Journal of Construction Engineering and Management, 130(2), 160–167. https://doi.org/10.1061/(ASCE)0733-9364(2004)130:2(160)
Hegazy, T., Abdel-Monem, M., & Atef Saad, D. (2014). Framework for enhanced progress tracking and control of linear projects. Engineering, Construction and Architectural Management, 21(1), 94–110. https://doi.org/10.1108/ECAM-08-2012-0080
Hegazy, T., Atef Saad, D., & Mostafa, K. (2020). Enhanced repetitive-scheduling computation and visualization. Journal of Construction Engineering and Management, 146(10), 04020118. https://doi.org/10.1061/(asce)co.1943-7862.0001911
Hejducki, Z. (2003). Scheduling model of construction activity with time couplings. Journal of Civil Engineering and Management, 9(4), 284–291. https://doi.org/10.1080/13923730.2003.10531341
Heravi, G., & Moridi, S. (2019). Resource-constrained time-cost tradeoff for repetitive construction projects. KSCE Journal of Civil Engineering, 23(8), 3265–3274. https://doi.org/10.1007/s12205-019-0151-x
Hsie, M., Chang, C.-J., Yang, I.-T., & Huang, C.-Y. (2009). Resource-constrained scheduling for continuous repetitive projects with time-based production units. Automation in Construction, 18(7), 942–949. https://doi.org/10.1016/j.autcon.2009.04.006
Hu, D., & Mohamed, Y. (2014). Simulation-model-structuring methodology for industrial construction fabrication shops. Journal of Construction Engineering and Management, 140(5), 04014002. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000825
Huang, Y.-C. (2006). Graphical-based multistage scheduling method for RC buildings. Construction Management and Economics, 24(1), 5–18. https://doi.org/10.1080/01446190500183743
Huang, R.-Y., & Halpin, D. W. (2000). Graphically based LP modelling for linear scheduling analysis: The POLO system. Engineering, Construction and Architectural Management, 7(1), 41–51. https://doi.org/10.1108/eb021131
Huang, R.-Y., & Sun, K.-S. (2005). System development for non-unit based repetitive project scheduling. Automation in Construction, 14(5), 650–665. https://doi.org/10.1016/j.autcon.2005.02.003
Huang, R.-Y., & Sun, K.-S. (2006a). An optimization model for workgroup-based repetitive scheduling. Canadian Journal of Civil Engineering, 33(9), 1172–1194. https://doi.org/10.1139/l06-057
Huang, R.-Y., & Sun, K.-S. (2006b). Non-unit-based planning and scheduling of repetitive construction projects. Journal of Construction Engineering and Management, 132(6), 585–597. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:6(585)
Huang, R.-Y., & Sun, K.-S. (2009). A GA optimization model for workgroup-based repetitive scheduling (WoRSM). Advances in Engineering Software, 40(3), 212–228. https://doi.org/10.1016/j.advengsoft.2008.01.010
Huang, Y., Zou, X., & Zhang, L. (2016). Genetic algorithm-based method for the deadline problem in repetitive construction projects considering soft logic. Journal of Management in Engineering, 32(4), 04016002. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000426
Hyari, K. H., & El-Rayes, K. (2006). Optimal planning and scheduling for repetitive construction projects. Journal of Management in Engineering, 22(1), 11–19. https://doi.org/10.1061/(ASCE)0742-597X(2006)22:1(11)
Hyari, K. H., El-Rayes, K., & El-Mashaleh, M. (2009). Automated trade-off between time and cost in planning repetitive construction projects. Construction Management and Economics, 27(8), 749–761. https://doi.org/10.1080/01446190903117793
Hyun, H., Jung, M., Yoon, I., Lee, H. S., & Lee, J. (2021). Multiple work zone strategy for repetitive on-site work of modular construction using parallel station method. Journal of Asian Architecture and Building Engineering, 20(3), 285–297. https://doi.org/10.1080/13467581.2020.1782917
Ioannou, P. G., & Yang, I.-T. (2016). Repetitive scheduling method: Requirements, modeling, and implementation. Journal of Construction Engineering and Management, 142(5), 04016002. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001107
Ipsilandis, P. G. (2007). Multiobjective linear programming model for scheduling linear repetitive projects. Journal of Construction Engineering and Management, 133(6), 417–424. https://doi.org/10.1061/(ASCE)0733-9364(2007)133:6(417)
Jaafari, A. (1984). Criticism of CPM for project planning analysis. Journal of Construction Engineering and Management, 110(2), 222–233. https://doi.org/10.1061/(ASCE)0733-9364(1984)110:2(222)
Jaśkowski, P., & Biruk, S. (2018). Reducing renewable resource demand fluctuation using soft precedence relations in project scheduling. Journal of Civil Engineering and Management, 24(4), 355–363. https://doi.org/10.3846/jcem.2018.3043
Jaśkowski, P., & Biruk, S. (2019). Minimizing the duration of repetitive construction processes with work continuity constraints. Computation, 7(1), 14. https://doi.org/10.3390/computation7010014
Jordan Srour, F., Kiomjian, D., & Srour, I. M. (2018). Automating the use of learning curve models in construction task duration estimates. Journal of Construction Engineering and Management, 144(7), 04018055. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001515
Kallantzis, A., Soldatos, J., & Lambropoulos, S. (2007). Linear versus network scheduling: A critical path comparison. Journal of Construction Engineering and Management, 133(7), 483–491. https://doi.org/10.1061/(ASCE)0733-9364(2007)133:7(483)
Kang, L. S., Park, I. C., & Lee, B. H. (2001). Optimal schedule planning for multiple, repetitive construction process. Journal of Construction Engineering and Management, 127(5), 382–390. https://doi.org/10.1061/(ASCE)0733-9364(2001)127:5(382)
Katsuragawa, C. M., Lucko, G., Isaac, S., & Su, Y. (2021). Fuzzy linear and repetitive scheduling for construction projects. Journal of Construction Engineering and Management, 147(3), 04021002. https://doi.org/10.1061/(asce)co.1943-7862.0001996
Kavanagh, D. P. (1985). Siren: A repetitive construction simulation model. Journal of Construction Engineering and Management, 111(3), 308–323. https://doi.org/10.1061/(ASCE)0733-9364(1985)111:3(308)
Lam, K. C., Lee, D., & Hu, T. (2001). Understanding the effect of the learning-forgetting phenomenon to duration of projects construction. International Journal of Project Management, 19(7), 411–420. https://doi.org/10.1016/S0263-7863(00)00025-9
Lee, J.-S. (2016). Estimating cumulative damages due to disruptions in repetitive construction. Journal of Construction Engineering and Management, 142(11), 1–11. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001184
Lee, H.-S., Roh, S., Park, M.-S., & Ryu, H.-G. (2010). Optimal option selection for finishing works of high-rise building. KSCE Journal of Civil Engineering, 14(5), 639–651. https://doi.org/10.1007/s12205-010-0904-z
Lee, D., Kim, D.-S., Kim, G.-H., & Kim, S. (2016). Time reduction effect of the enhanced TACT method for high-rise residential buildings. Journal of Civil Engineering and Management, 22(7), 944–953. https://doi.org/10.3846/13923730.2014.945949
Lee, S., Lee, S., & Son, J. (2016). Developing a process model for optimizing linear process plans based on three types of buffers and brute-force algorithm. Journal of Asian Architecture and Building Engineering, 15(2), 215–222. https://doi.org/10.3130/jaabe.15.215
Leu, S. S., & Hwang, S. T. (2001). Optimal repetitive scheduling model with shareable resource constraint. Journal of Construction Engineering and Management, 127(4), 270–280. https://doi.org/10.1061/(ASCE)0733-9364(2001)127:4(270)
Liu, S. S., & Wang, C. J. (2007). Optimization model for resource assignment problems of linear construction projects. Automation in Construction, 16(4), 460–473. https://doi.org/10.1016/j.autcon.2006.08.004
Liu, S. S., & Wang, C. J. (2009). Two-stage profit optimization model for linear scheduling problems considering cash flow. Construction Management and Economics, 27(11), 1023–1037. https://doi.org/10.1080/01446190903233111
Liu, S. S., & Wang, C. J. (2012). Optimizing linear project scheduling with multi-skilled crews. Automation in Construction, 24, 16–23. https://doi.org/10.1016/j.autcon.2011.12.009
Long, L. D., & Ohsato, A. (2009). A genetic algorithm-based method for scheduling repetitive construction projects. Automation in Construction, 18(4), 499–511. https://doi.org/10.1016/j.autcon.2008.11.005
Lu, M., & Li, H. (2003). Resource-activity critical-path method for construction planning. Journal of Construction Engineering and Management, 129(4), 412–420. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:4(412)
Lucko, G. (2008). Productivity scheduling method compared to linear and repetitive project scheduling methods. Journal of Construction Engineering and Management, 134(9), 711–720. https://doi.org/10.1061/(asce)0733-9364(2008)134:9(711)
Lucko, G. (2009). Productivity scheduling method: Linear schedule analysis with singularity functions. Journal of Construction Engineering and Management, 135(4), 246–253. https://doi.org/10.1061/(ASCE)0733-9364(2009)135:4(246)
Lucko, G. (2011a). Integrating efficient resource optimization and linear schedule analysis with singularity functions. Journal of Construction Engineering and Management, 137(1), 45–55. https://doi.org/10.1061/(asce)co.1943-7862.0000244
Lucko, G. (2011b). Optimizing cash flows for linear schedules modeled with singularity functions by simulated annealing. Journal of Construction Engineering and Management, 137(7), 523–535. https://doi.org/10.1061/(asce)co.1943-7862.0000324
Lucko, G., & Peña Orozco, A. A. (2009). Float types in linear schedule analysis with singularity functions. Journal of Construction Engineering and Management, 135(5), 368–377. https://doi.org/10.1061/(asce)co.1943-7862.0000007
Lucko, G., & Gattei, G. (2016). Line-of-balance against linear scheduling: Critical comparison. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 169(1), 26–44. https://doi.org/10.1680/jmapl.15.00016
Lucko, G., Alves, T. D. C. L., & Angelim, V. L. (2014a). Challenges and opportunities for productivity improvement studies in linear, repetitive, and location-based scheduling. Construction Management and Economics, 32(6), 575–594. https://doi.org/10.1080/01446193.2013.845305
Lucko, G., Said, H. M. M., & Bouferguene, A. (2014b). Construction spatial modeling and scheduling with three-dimensional singularity functions. Automation in Construction, 43, 132–143. https://doi.org/10.1016/j.autcon.2014.03.008
Lucko, G., Araújo, L. G., & Cates, G. R. (2016). Slip chart-inspired project schedule diagramming: origins, buffers, and extension to linear schedules. Journal of Construction Engineering and Management, 142(5), 04015101. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001089
Lutz, J. D., & Hijazi, A. (1993). Planning repetitive construction: Current practice. Construction Management and Economics, 11(2), 99–110. https://doi.org/10.1080/01446199300000003
Mahdi, I. M. (2004). A new LSM approach for planning repetitive housing projects. International Journal of Project Management, 22(4), 339–346. https://doi.org/10.1016/S0263-7863(03)00071-1
Maravas, A., & Pantouvakis, J.-P. (2011). Fuzzy repetitive scheduling method for projects with repeating activities. Journal of Construction Engineering and Management, 137(7), 561–564. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000319
Mattila, K. G., & Abraham, D. M. (1998). Resource leveling of linear schedules using integer linear programming. Journal of Construction Engineering and Management, 124(3), 232–244. https://doi.org/10.1061/(asce)0733-9364(1998)124:3(232)
Mattila, K. G., & Park, A. (2003). Comparison of linear scheduling model and repetitive scheduling method. Journal of Construction Engineering and Management, 129(1), 56–64. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:1(56)
Moreno, F., Orozco, F., Rojas, O., Senior, B. A., Poshdar, M., & Forcael, E. (2020). A fixed start scheduling approach for repetitive construction projects. KSCE Journal of Civil Engineering, 24, 1671–1682. https://doi.org/10.1007/s12205-020-1429-8
Moselhi, O., & El-Rayes, K. (1993a). Least cost scheduling for repetitive projects. Canadian Journal of Civil Engineering, 20(5), 834–843. https://doi.org/10.1139/l93-109
Moselhi, O., & El-Rayes, K. (1993b). Scheduling of repetitive projects with cost optimization. Journal of Construction Engineering and Management, 119(4), 681–697. https://doi.org/10.1061/(ASCE)0733-9364(1993)119:4(681)
Moselhi, O., & Hassanein, A. (2003). Optimized scheduling of linear projects. Journal of Construction Engineering and Management, 129(6), 664–673. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:6(664)
Moselhi, O., Bakry, I., & Alshibani, A. (2016). Accelerating repetitive construction projects: With uncertainty and contractors’ judgment. Canadian Journal of Civil Engineering, 43(11), 949–957. https://doi.org/10.1139/cjce-2014-0347
Murguia, D., & Urbina, A. (2018). Complex production systems: Non-linear and non-repetitive projects. In 26th Annual Conference of the International Group for Lean Construction (pp. 858–868), Chennai, India. https://doi.org/10.24928/2018/0222
Naresh, A. L., & Jahren, C. T. (1999). Learning outcomes from construction simulation modeling. Journal of Civil Engineering and Environmental Systems, 16(2), 129–144. https://doi.org/10.1080/02630259908970257
Nassar, K. (2005). Evolutionary optimization of resource allocation in repetitive construction schedules. Electronic Journal of Information Technology in Construction (ITcon), 10, 265–273.
O’Brien, J. J., Kreitzberg, F. C., & Mikes, W. F. (1985). Network scheduling variations for repetitive work. Journal of Construction Engineering and Management, 111(2), 105–116. https://doi.org/10.1061/(ASCE)0733-9364(1985)111:2(105)
Podolski, M. (2017). Management of resources in multiunit construction projects with the use of a tabu search algorithm. Journal of Civil Engineering and Management, 23(2), 263–272. https://doi.org/10.3846/13923730.2015.1073616
Podolski, M., & Sroka, B. (2019). Cost optimization of multiunit construction projects using linear programming and metaheuristic-based simulated annealing algorithm. Journal of Civil Engineering and Management, 25(8), 848–857. https://doi.org/10.3846/jcem.2019.11308
Radziszewska-Zielina, E., & Sroka, B. (2018). Planning repetitive construction projects considering technological constraints. Open Engineering, 8(1), 500–505. https://doi.org/10.1515/eng-2018-0058
Reda, R. M. (1990). RPM: Repetitive Project Modeling. Journal of Construction Engineering and Management, 116(2), 316–330. https://doi.org/10.1061/(ASCE)0733-9364(1990)116:2(316)
Rogalska, M., & Hejducki, Z. (2007). Time buffers in construction process scheduling. Journal of Civil Engineering and Management, 13(2), 143–148. https://doi.org/10.1080/13923730.2007.9636430
Rogalska, M., Bożejko, W., & Hejducki, Z. (2008). Time/cost optimization using hybrid evolutionary algorithm in construction project scheduling. Automation in Construction, 18(1), 24–31. https://doi.org/10.1016/j.autcon.2008.04.002
Roofigari-Esfahan, N., & Razavi, S. (2017). Uncertainty-aware linear schedule optimization: A space-time constraint-satisfaction approach. Journal of Construction Engineering and Management, 143(5), 04016132. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001276
Russell, A. D. (1985). Microcomputers, management, and high-rise construction: The next step. Canadian Journal of Civil Engineering, 12(2), 396–414. https://doi.org/10.1139/l85-042
Russell, A. D., & Caselton, W. F. (1988). Extensions to linear scheduling optimization. Journal of Construction Engineering and Management, 114(1), 36–52. https://doi.org/10.1061/(ASCE)0733-9364(1988)114:1(36)
Russell, A. D., & Wong, W. C. M. (1993). New generation of planning structures. Journal of Construction Engineering and Management, 119(2), 196–214. https://doi.org/10.1061/(ASCE)0733-9364(1993)119:2(196)
Russell, A., Staub-French, S., Tran, N., & Wong, W. (2009). Visualizing high-rise building construction strategies using linear scheduling and 4D CAD. Automation in Construction, 18(2), 219–236. https://doi.org/10.1016/j.autcon.2008.08.001
Salama, T., & Moselhi, O. (2019). Multi-objective optimization for repetitive scheduling under uncertainty. Engineering, Construction and Architectural Management, 26(7), 1294–1320. https://doi.org/10.1108/ECAM-05-2018-0217
Salama, T., Salah, A., & Moselhi, O. (2018). Integration of linear scheduling method and the critical chain project management. Canadian Journal of Civil Engineering, 45(1), 30–40. https://doi.org/10.1139/cjce-2017-0020
Sarraj, Z. M. A. (1990). Formal development of line-of-balance technique. Journal of Construction Engineering and Management, 116(4), 689–704. https://doi.org/10.1061/(ASCE)0733-9364(1990)116:4(689)
Sawhney, A., Mund, A., & Chaitavatputtiporn, T. (2003). Petri Net-based scheduling of construction projects. Civil Engineering and Environmental Systems, 20(4), 255–271. https://doi.org/10.1080/10286600310001633848
Senior, B. A., & Halpin, D. W. (1998). Simplified simulation system for construction projects. Journal of Construction Engineering and Management, 124(1), 72–81. https://doi.org/10.1061/(ASCE)0733-9364(1998)124:1(72)
Seuring, S., & Müller, M. (2008). From a literature review to a conceptual framework for sustainable supply chain management. Journal of Cleaner Production, 16(15), 1699–1710. https://doi.org/10.1016/j.jclepro.2008.04.020
Sharma, S., & Bansal, V. K. (2018). Location-based planning and scheduling of highway construction projects in hilly terrain using GIS. Canadian Journal of Civil Engineering, 45(7), 570–582. https://doi.org/10.1139/cjce-2017-0359
Sharma, H., McIntyre, C., Gao, Z., & Nguyen, T.-H. (2009). Developing a traffic closure integrated linear schedule for highway rehabilitation projects. Journal of Construction Engineering and Management, 135(3), 146–155. https://doi.org/10.1061/(asce)0733-9364(2009)135:3(146)
Shim, E., & Kim, B.-C. (2014). Batch-size based repetitive scheduling method (BRSM). International Journal of Construction Education and Research, 10(2), 140–156. https://doi.org/10.1080/15578771.2013.826753
Shtub, A., LeBlanc, L. J., & Cai, Z. (1996). Scheduling programs with repetitive projects: A comparison of a simulated annealing, a genetic and a pair-wise swap algorithm. European Journal of Operational Research, 88(1), 124–138. https://doi.org/10.1016/0377-2217(94)00158-8
Su, Y., & Lucko, G. (2016). Linear scheduling with multiple crews based on line-of-balance and productivity scheduling method with singularity functions. Automation in Construction, 70, 38–50. https://doi.org/10.1016/j.autcon.2016.05.011
Suhail, S. A., & Neale, R. H. (1994). CPM/LOB: New methodology to integrate CPM and line of balance. Journal of Construction Engineering and Management, 120(3), 667–684. https://doi.org/10.1061/(ASCE)0733-9364(1994)120:3(667)
Suresh, M., Dutta, P., & Jain, K. (2011). Analysis of an EPC project: A solution to the resource constrained project scheduling problem using genetic algorithms. International Journal of Industrial and Systems Engineering, 8(2), 251–269. https://doi.org/10.1504/IJISE.2011.041372
Tang, Y., Liu, R., & Sun, Q. (2014a). Schedule control model for linear projects based on linear scheduling method and constraint programming. Automation in Construction, 37, 22–37. https://doi.org/10.1016/j.autcon.2013.09.008
Tang, Y., Liu, R., & Sun, Q. (2014b). Two-stage scheduling model for resource leveling of linear projects. Journal of Construction Engineering and Management, 140(7), 04014022. https://doi.org/10.1061/(asce)co.1943-7862.0000862
Tang, Y., Sun, Q., Liu, R., & Wang, F. (2018). Resource leveling based on line of balance and constraint programming. Computer-Aided Civil and Infrastructure Engineering, 33(10), 864–884. https://doi.org/10.1111/mice.12383
Tao, S., Wu, C., Sheng, Z., & Wang, X. (2018). Space-time repetitive project scheduling considering location and congestion. Journal of Computing in Civil Engineering, 32(3), 04018017. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000745
Thabet, W. Y., & Beliveau, Y. J. (1994a). Modeling work space to schedule repetitive floors in multistory buildings. Journal of Construction Engineering and Management, 120(1), 96–116. https://doi.org/10.1061/(ASCE)0733-9364(1994)120:1(96)
Thabet, W. Y., & Beliveau, Y. J. (1994b). HVLS: Horizontal and vertical logic scheduling for multistory projects. Journal of Construction Engineering and Management, 120(4), 875–892. https://doi.org/10.1061/(ASCE)0733-9364(1994)120:4(875)
Thabet, W. Y., & Beliveau, Y. J. (1997). SCaRC: Space-Constrained Resource-Constrained scheduling system. Journal of Computing in Civil Engineering, 11(1), 48–59. https://doi.org/10.1061/(ASCE)0887-3801(1997)11:1(48)
Tokdemir, O. B., Arditi, D., & Balcik, C. (2006). ALISS: Advanced Linear Scheduling System. Construction Management and Economics, 24(12), 1253–1267. https://doi.org/10.1080/01446190600953706
Tokdemir, O. B., Erol, H., & Dikmen, I. (2019). Delay risk assessment of repetitive construction projects using line-of-balance scheduling and Monte Carlo simulation. Journal of Construction Engineering and Management, 145(2), 04018132. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001595
Tomar, A., & Bansal, V. K. (2019). Scheduling of repetitive construction projects using geographic information systems: an integration of critical path method and line of balance. Asian Journal of Civil Engineering, 20(4), 549–562. https://doi.org/10.1007/s42107-019-00123-3
Tomar, A., & Bansal, V. K. (2020). A Novel Step Toward Repetitive Projects Scheduling Using Geographic Information Systems. Arabian Journal for Science and Engineering, 45(5), 3983–3997. https://doi.org/10.1007/s13369-019-04330-7
Tomar, A., & Bansal, V. K. (2022). Generation, visualization, and evaluation schedule of repetitive construction projects using GIS. International Journal of Construction Management, 22(6), 1104–1119. https://doi.org/10.1080/15623599.2019.1683691
Tomczak, M. (2019). Modeling of the harmonization method for executing a multi-unit construction project. Open Engineering, 9(1), 282–291. https://doi.org/10.1515/eng-2019-0036
Tomczak, M., & Jaśkowski, P. (2020). New approach to improve general contractor crew’s work continuity in repetitive construction projects. Journal of Construction Engineering and Management, 146(5), 04020043. https://doi.org/10.1061/(asce)co.1943-7862.0001824
Tomczak, M., & Jaśkowski, P. (2021). Preferences of construction managers regarding the quality and optimization criteria of project schedules. Sustainability, 13(2), 544. https://doi.org/10.3390/su13020544
Tran, D.-H., Luong, D.-L., Duong, M.-T., Le, T.-N., & Pham, A.-D. (2018). Opposition multiple objective symbiotic organisms search (OMOSOS) for time, cost, quality and work continuity tradeoff in repetitive projects. Journal of Computational Design and Engineering, 5(2), 160–172. https://doi.org/10.1016/j.jcde.2017.11.008
Tran, D.-H., Chou, J.-S., & Luong, D.-L. (2019). Multi-objective symbiotic organisms optimization for making time-cost tradeoffs in repetitive project scheduling problem. Journal of Civil Engineering and Management, 25(4), 322–339. https://doi.org/10.3846/jcem.2019.9681
Tran, D.-H., Chou, J.-S., & Luong, D.-L. (2020). Optimizing non-unit repetitive project resource and scheduling by evolutionary algorithms. Operational Research, 22, 77–103. https://doi.org/10.1007/s12351-019-00544-7
Ungureanu, L. C., Hartmann, T., & Serbanoiu, I. (2019). Quantitative lean assessment of line of balance schedules’ quality. Engineering, Construction and Architectural Management, 26(2), 224–244. https://doi.org/10.1108/ECAM-05-2017-0088
Vanhoucke, M. (2006). Work continuity constraints in project scheduling. Journal of Construction Engineering and Management, 132(1), 14–25. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:1(14)
Wang, C.-H., & Huang, Y.-C. (1998). Controlling activity interval times in LOB scheduling. Construction Management and Economics, 16(1), 5–16. https://doi.org/10.1080/014461998372547
Wang, T., Abdallah, M., Clevenger, C., & Monghasemi, S. (2021). Time–cost–quality trade-off analysis for planning construction projects. Engineering, Construction and Architectural Management, 28(1), 82–100. https://doi.org/10.1108/ECAM-12-2017-0271
Yamín, R. A., & Harmelink, D. J. (2001). Comparison of Linear Scheduling Model (LSM) and Critical Path Method (CPM). Journal of Construction Engineering and Management, 127(5), 374–381. https://doi.org/10.1061/(asce)0733-9364(2001)127:5(374)
Yang, I.-T., & Ioannou, P. G. (2004). Scheduling system with focus on practical concerns in repetitive projects. Construction Management and Economics, 22(6), 619–630. https://doi.org/10.1080/01446190310001649065
Yang, I.-T., & Chang, C.-Y. (2005). Stochastic resource-constrained scheduling for repetitive construction projects with uncertain supply of resources and funding. International Journal of Project Management, 23(7), 546–553. https://doi.org/10.1016/j.ijproman.2005.03.003
Yi, K. J., Lee, H.-S., & Choi, Y. K. (2002). Network creation and development for repetitive-unit projects. Journal of Construction Engineering and Management, 128(3), 257–264. https://doi.org/10.1061/(ASCE)0733-9364(2002)128:3(257)
Zhang, L., & Qi, J. (2012). Controlling path and controlling segment analysis in repetitive scheduling method. Journal of Construction Engineering and Management, 138(11), 1341–1345. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000535
Zhang, H., Tam, G. M., & Shi, J. J. (2002). Simulation-based methodology for project scheduling. Construction Management and Economics, 20(8), 667–678. https://doi.org/10.1080/0144619022000014088
Zhang, H., Li, H., & Tam, C. M. (2006). Heuristic scheduling of resource-constrained, multiple-mode and repetitive projects. Construction Management and Economics, 24(2), 159–169. https://doi.org/10.1080/01446190500184311
Zhang, L., Zou, X., & Chen, X. (2012). Resource-constrained scheduling in repetitive projects. Advances in Information Sciences and Service Sciences, 4(14), 287–294. https://doi.org/10.4156/aiss.vol4.issue14.35
Zhang, L., Zou, X., & Kan, Z. (2014). Improved strategy for resource allocation in repetitive projects considering the learning effect. Journal of Construction Engineering and Management, 140(11), 04014053. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000896
Zhang, L., Zou, X., & Qi, J. (2015). A trade-off between time and cost in scheduling repetitive construction projects. Journal of Industrial and Management Optimization, 11(4), 1423–1434. https://doi.org/10.3934/jimo.2015.11.1423
Zhang, L., Dai, G., Zou, X., & Qi, J. (2020). Robustness-based multi-objective optimization for repetitive projects under work continuity uncertainty. Engineering, Construction and Architectural Management, 27(10), 3095–3113. https://doi.org/10.1108/ECAM-08-2019-0458
Zolfaghar Dolabi, H. R., Afshar, A., & Abbasnia, R. (2014). CPM/LOB scheduling method for project deadline constraint satisfaction. Automation in Construction, 48, 107–118. https://doi.org/10.1016/j.autcon.2014.09.003
Zou, X., & Zhang, L. (2020). A constraint programming approach for scheduling repetitive projects with atypical activities considering soft logic. Automation in Construction, 109, 102990. https://doi.org/10.1016/j.autcon.2019.102990
Zou, X., Fang, S.-C., Huang, Y.-S., & Zhang, L. (2017). Mixed-integer linear programming approach for scheduling repetitive projects with time-cost trade-off consideration. Journal of Computing in Civil Engineering, 31(3), 06016003. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000641
Zou, X., Wu, G., & Zhang, Q. (2021). Work continuity constraints in repetitive project scheduling considering soft logic. Engineering, Construction and Architectural Management, 28(6), 1713–1738. https://doi.org/10.1108/ECAM-11-2019-0595
Abd El Razek, R. H., Diab, A. M., Hafez, S. M., & Aziz, R. F. (2010). Time-cost-quality trade-off software by using simplified Genetic algorithm for typical-repetitive construction projects. International Journal of Civil and Environmental Engineering, 4(1), 22–31.
Abdallah, M., & Marzouk, M. (2013). Planning of tunneling projects using computer simulation and fuzzy decision making. Journal of Civil Engineering and Management, 19(4), 591–607. https://doi.org/10.3846/13923730.2013.793608
Abdallah, M., & Alshahri, A. (2019). Optimizing planning of build–operate–transfer projects to maximize investor profit. Canadian Journal of Civil Engineering, 46(1), 26–37. https://doi.org/10.1139/cjce-2017-0327
Adeli, H., & Karim, A. (1997). Scheduling/cost optimization and neural dynamics model for construction. Journal of Construction Engineering and Management, 123(4), 450–458. https://doi.org/10.1061/(ASCE)0733-9364(1997)123:4(450)
Agrama, F. A. E. M. (2011). Linear projects scheduling using spreadsheets features. Alexandria Engineering Journal, 50(2), 179–185. https://doi.org/10.1016/j.aej.2011.01.018
Agrama, F. A. E. M. (2014). Multi-objective genetic optimization for scheduling a multi-storey building. Automation in Construction, 44, 119–128. https://doi.org/10.1016/j.autcon.2014.04.005
Ali, M. M., & Elazouni, A. (2009). Finance-based CPM/LOB scheduling of projects with repetitive non-serial activities. Construction Management and Economics, 27(9), 839–856. https://doi.org/10.1080/01446190903191764
Altuwaim, A., & El-Rayes, K. (2018a). Minimizing duration and crew work interruptions of repetitive construction projects. Automation in Construction, 88, 59–72. https://doi.org/10.1016/j.autcon.2017.12.024
Altuwaim, A., & El-Rayes, K. (2018b). Optimizing the scheduling of repetitive construction to minimize interruption cost. Journal of Construction Engineering and Management, 144(7), 04018051. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001510
Ammar, M. A. (2003). Float analysis of non-serial repetitive activities. Construction Management and Economics, 21(5), 535–542. https://doi.org/10.1080/0144619032000073523
Ammar, M. A. (2013). LOB and CPM integrated method for scheduling repetitive projects. Journal of Construction Engineering and Management, 139(1), 44–50. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000569
Ammar, M. A. (2020). Resource optimisation in line of balance scheduling. Construction Management and Economics, 38(8), 715–725. https://doi.org/10.1080/01446193.2019.1606924
Ammar, M. A. (2022). Optimization of line of balance scheduling considering work interruption. International Journal of Construction Management, 22(2), 305–316. https://doi.org/10.1080/15623599.2019.1624003
Ammar, M. A., & Abdel-Maged, A. F. (2018). Modeling of LOB scheduling with learning development effect. International Journal of Construction Management, 18(6), 517–526. https://doi.org/10.1080/15623599.2017.1357350
Arabpour Roghabadi, M., & Moselhi, O. (2021). Optimized crew selection for scheduling of repetitive projects. Engineering, Construction and Architectural Management, 28(6), 1517–1540. https://doi.org/10.1108/ECAM-10-2019-0590
Arditi, D., & Albulak, M. Z. (1986). Line-of-Balance scheduling in pavement construction. Journal of Construction Engineering and Management, 112(3), 411–424. https://doi.org/10.1061/(ASCE)0733-9364(1986)112:3(411)
Arditi, D., Tokdemir, O. B., & Suh, K. (2001). Scheduling system for repetitive unit construction using line-of-balance technology. Engineering, Construction and Architectural Management, 8(2), 90–103. https://doi.org/10.1108/eb021173
Arditi, D., Tokdemir, O. B., & Suh, K. (2002a). Challenges in line-of-balance scheduling. Journal of Construction Engineering and Management, 128(6), 545–556. https://doi.org/10.1061/(ASCE)0733-9364(2002)128:6(545)
Arditi, D., Sikangwan, P., & Tokdemir, O. B. (2002b). Scheduling system for high rise building construction. Construction Management and Economics, 20(4), 353–364. https://doi.org/10.1080/01446190210131647
Bakry, I., Moselhi, O., & Zayed, T. (2014). Optimized acceleration of repetitive construction projects. Automation in Construction, 39, 145–151. https://doi.org/10.1016/j.autcon.2013.07.003
Bakry, I., Moselhi, O., & Zayed, T. (2016). Optimized scheduling and buffering of repetitive construction projects under uncertainty. Engineering, Construction and Architectural Management, 23(6), 782–800. https://doi.org/10.1108/ECAM-05-2014-0069
Baqerin, M. H., Shafahi, Y., & Kashani, H. (2016). Application of Weibull analysis to evaluate and forecast schedule performance in repetitive projects. Journal of Construction Engineering and Management, 142(2), 04015058. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001040
Biruk, S., & Jaśkowski, P. (2008). Simulation modelling construction project with repetitive tasks using Petri nets theory. Journal of Business Economics and Management, 9(3), 219–226. https://doi.org/10.3846/1611-1699.2008.9.219-226
Biruk, S., & Jaśkowski, P. (2009). The work continuity constraints problem in construction projects, network models. Archives of Civil Engineering, 55(1), 29–41.
Biruk, S., & Rzepecki, Ł. (2017). Wpływ zjawiska uczenia siȩ i zapominania na czas realizacji powtarzalnych procesów budowlanych realizowanych w warunkach losowyc [The impact of learning-forgetting phenomenon on duration of repetitive construction processes conducted in random conditions]. Scientific Review Engineering and Environmental Sciences, 26(2), 202–209. https://doi.org/10.22630/PNIKS.2017.26.2.18
Bonnal, P., Gourc, D., Hameri, A.-P., & Lacoste, G. (2005). A linear-discrete scheduling model for the resource-constrained project scheduling problem. Construction Management and Economics, 23(8), 797–814. https://doi.org/10.1080/01446190500040869
Bonnal, P., Baudin, M., & De Jonghe, J. (2013). Merging PDM, RSM and LSM scheduling approaches: Into a single construction project scheduling system. Journal of Modern Project Management, 1(2), 6–17.
Bożejko, W., Hejducki, Z., & Wodecki, M. (2012). Applying metaheuristic strategies in construction projects management. Journal of Civil Engineering and Management, 18(5), 621–630. https://doi.org/10.3846/13923730.2012.719837
Bożejko, W., Hejducki, Z., Uchroński, M., & Wodecki, M. (2014). Solving resource-constrained construction scheduling problems with overlaps by metaheuristic. Journal of Civil Engineering and Management, 20(5), 649–659. https://doi.org/10.3846/13923730.2014.906496
Cheng, T.-M., Feng, C.-W., & Chen, Y.-L. (2005). A hybrid mechanism for optimizing construction simulation models. Automation in Construction, 14(1), 85–98. https://doi.org/10.1016/j.autcon.2004.07.014
Cho, K., Hong, T., & Hyun, C. (2010). Integrated schedule and cost model for repetitive construction process. Journal of Management in Engineering, 26(2), 78–88. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000009
Cho, K., Hong, T., & Hyun, C. (2011). Scheduling model for repetitive construction processes for high-rise buildings. Canadian Journal of Civil Engineering, 38(1), 36–48. https://doi.org/10.1139/L10-108
Cho, K., Hong, T., & Hyun, C. (2013). Space zoning concept-based scheduling model for repetitive construction process. Journal of Civil Engineering and Management, 19(3), 409–421. https://doi.org/10.3846/13923730.2012.757561
Chrzanowski, E. N., & Johnston, D. W. (1986). Application of linear scheduling. Journal of Construction Engineering and Management, 112(4), 476–491. https://doi.org/10.1061/(ASCE)0733-9364(1986)112:4(476)
Cole, L. J. R. (1991). Construction scheduling: Principles, practices, and six case studies. Journal of Construction Engineering and Management, 117(4), 579–588. https://doi.org/10.1061/(ASCE)0733-9364(1991)117:4(579)
Couto, J. P., & Teixeira, J. C. (2005). Using linear model for learning curve effect on highrise floor construction. Construction Management and Economics, 23(4), 355–364. https://doi.org/10.1080/01446190500040505
Damci, A. (2020). Revisiting the concept of natural rhythm of production in line of balance scheduling. International Journal of Construction Management. https://doi.org/10.1080/15623599.2020.1786764
Damci, A., Arditi, D., & Polat, G. (2013a). Multiresource leveling in line-of-balance scheduling. Journal of Construction Engineering and Management, 139(9), 1108–1116. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000716
Damci, A., Arditi, D., & Polat, G. (2013b). Resource leveling in line-of-balance scheduling. Computer-Aided Civil and Infrastructure Engineering, 28(9), 679–692. https://doi.org/10.1111/mice.12038
de Araújo, M. C. B., Alencar, L. H., & de Miranda Mota, C. M. (2017). Project procurement management: A structured literature review. International Journal of Project Management, 35(3), 353–377. https://doi.org/10.1016/j.ijproman.2017.01.008
Dhanasekar, M. (2000). Identification of optimal size resources for a repetitive housing construction. Engineering, Construction and Architectural Management, 7(4), 347–361. https://doi.org/10.1108/eb021158
Duffy, G. A., Oberlender, G. D., & Jeong, D. H. S. (2011). Linear scheduling model with varying production rates. Journal of Construction Engineering and Management, 137(8), 574–582. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000320
Duffy, G., Woldesenbet, A., Jeong, D. H. S., & Oberlender, G. D.
(2012). Advanced linear scheduling program with varying production rates for pipeline construction projects. Automation in Construction, 27, 99–110. https://doi.org/10.1016/j.autcon.2012.05.014
Dzeng, R. J., Wang, W. C., & Tserng, H. P. (2004). Module-based construction schedule administration for public infrastructure agencies. Journal of Construction Engineering and Management, 130(1), 5–14. https://doi.org/10.1061/(ASCE)0733-9364(2004)130:1(5)
Eid, M. S., Elbeltagi, E. E., & El-Adaway, I. H. (2021). Simultaneous multi-criteria optimization for scheduling linear infrastructure projects. International Journal of Construction Management, 21(1), 41–55. https://doi.org/10.1080/15623599.2018.1505027
Eiris Pereira, R., & Flood, I. (2017). Impact of linear correlation on construction project performance using stochastic linear scheduling. Visualization in Engineering, 5, 8. https://doi.org/10.1186/s40327-017-0045-2
El-Rayes, K. (2001). Object-oriented model for repetitive construction scheduling. Journal of Construction Engineering and Management, 127(3), 199–205. https://doi.org/10.1061/(ASCE)0733-9364(2001)127:3(199)
El-Rayes, K., & Moselhi, O. (1998). Resource-driven scheduling of repetitive activities. Construction Management and Economics, 16(4), 433–446. https://doi.org/10.1080/014461998372213
El-Rayes, K., & Moselhi, O. (2001). Optimizing resource utilization for repetitive construction projects. Journal of Construction Engineering and Management, 127(1), 18–26. https://doi.org/10.1061/(ASCE)0733-9364(2001)127:1(18)
El-Rayes, K., Ramanathan, R., & Moselhi, O. (2002). An object-oriented model for planning and control of housing construction. Construction Management and Economics, 20(3), 201–210. https://doi.org/10.1080/01446190110115312
Elhakeem, A., & Hegazy, T. (2005). Graphical approach for manpower planning in infrastructure networks. Journal of Construction Engineering and Management, 131(2), 168–175. https://doi.org/10.1061/(ASCE)0733-9364(2005)131:2(168)
Ezeldin, A. S., & Soliman, A. (2009). Hybrid time-cost optimization of nonserial repetitive construction projects. Journal of Construction Engineering and Management, 135(1), 42–55. https://doi.org/10.1061/(ASCE)0733-9364(2009)135:1(42)
Fan, S.-L., & Tserng, H. P. (2006). Object-oriented scheduling for repetitive projects with soft logics. Journal of Construction Engineering and Management, 132(1), 35–48. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:1(35)
Fan, S.-L., Sun, K.-S., & Wang, Y.-R. (2012). GA optimization model for repetitive projects with soft logic. Automation in Construction, 21(1), 253–261. https://doi.org/10.1016/j.autcon.2011.06.009
García-Nieves, J. D. D., Ponz-Tienda, J. L. L., Salcedo-Bernal, A., & Pellicer, E. (2018). The multimode resource-constrained project scheduling problem for repetitive activities in construction projects. Computer-Aided Civil and Infrastructure Engineering, 33(8), 655–671. https://doi.org/10.1111/mice.12356
García-Nieves, J. D. D., Ponz-Tienda, J. L. L., Ospina-Alvarado, A., & Bonilla-Palacios, M. (2019). Multipurpose linear programming optimization model for repetitive activities scheduling in construction projects. Automation in Construction, 105, 102799. https://doi.org/10.1016/j.autcon.2019.03.020
Georgy, M. E. (2008). Evolutionary resource scheduler for linear projects. Automation in Construction, 17(5), 573–583. https://doi.org/10.1016/j.autcon.2007.10.005
González, V., Alarcón, L. F., & Molenaar, K. (2009). Multiobjective design of Work-In-Process buffer for scheduling repetitive building projects. Automation in Construction, 18(2), 95–108. https://doi.org/10.1016/j.autcon.2008.05.005
Gouda, A., Hosny, O., & Nassar, K. (2017). Optimal crew routing for linear repetitive projects using graph theory. Automation in Construction, 81, 411–421. https://doi.org/10.1016/j.autcon.2017.03.007
Hafez, S. M. (2004). Practical limitations of line-of-balance in scheduling repetitive construction units. Alexandria Engineering Journal, 43(5), 653–661.
Hafez, S. M. (2005). Developing classical schedule technology. Alexandria Engineering Journal, 44(2), 267–277.
Hajdasz, M. (2014). Flexible management of repetitive construction processes by an intelligent support system. Expert Systems with Applications, 41(4, Part 1), 962–973. https://doi.org/10.1016/j.eswa.2013.06.063
Han, S., Lee, S., & Peña-Mora, F. (2012). Identification and quantification of non-value-adding effort from errors and changes in design and construction projects. Journal of Construction Engineering and Management, 138(1), 98–109. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000406
Handa, V. K., & Barcia, R. M. (1986). Linear scheduling using optimal control theory. Journal of Construction Engineering and Management, 112(3), 387–393. https://doi.org/10.1061/(asce)0733-9364(1986)112:3(387)
Harmelink, D. J. (2001). Linear scheduling model: Float characteristics. Journal of Construction Engineering and Management, 127(4), 255–260. https://doi.org/10.1061/(asce)0733-9364(2001)127:4(255)
Harmelink, D. J., & Rowings, J. E. (1998). Linear scheduling model: Development of controlling activity path. Journal of Construction Engineering and Management, 124(4), 263–268. https://doi.org/10.1061/(ASCE)0733-9364(1998)124:4(263)
Harris, R. B., & Ioannou, P. G. (1998). Scheduling projects with repeating activities. Journal of Construction Engineering and Management, 124(4), 269–278. https://doi.org/10.1061/(ASCE)0733-9364(1998)124:4(269)
Hassan, A., & El-Rayes, K. (2020). Quantifying the interruption impact of activity delays in non-serial repetitive construction projects. Construction Management and Economics, 38(6), 515–533. https://doi.org/10.1080/01446193.2019.1657922
Hassan, A., El-Rayes, K., & Attalla, M. (2021). Optimizing the scheduling of crew deployments in repetitive construction projects under uncertainty. Engineering, Construction and Architectural Management, 28(6), 1615–1634. https://doi.org/10.1108/ECAM-05-2020-0304
Hassanein, A., & Moselhi, O. (2004). Planning and scheduling highway construction. Journal of Construction Engineering and Management, 130(5), 638–646. https://doi.org/10.1061/(ASCE)0733-9364(2004)130:5(638)
Hassanein, A., & Moselhi, O. (2005). Accelerating linear projects. Construction Management and Economics, 23(4), 377–385. https://doi.org/10.1080/01446190410001673571
Hegazy, T. (2001). Critical path method-line of balance model for efficient scheduling of repetitive construction projects. Transportation Research Record: Journal of the Transportation Research Board, 1761(1), 124–129. https://doi.org/10.3141/1761-16
Hegazy, T., & Wassef, N. (2001). Cost optimization in projects with repetitive nonserial activities. Journal of Construction Engineering and Management, 127(3), 183–191. https://doi.org/10.1061/(ASCE)0733-9364(2001)127:3(183)
Hegazy, T., & Kamarah, E. (2008). Efficient repetitive scheduling for high-rise construction. Journal of Construction Engineering and Management, 134(4), 253–264. https://doi.org/10.1061/(ASCE)0733-9364(2008)134:4(253)
Hegazy, T., Elhakeem, A., & Elbeltagi, E. (2004). Distributed scheduling model for infrastructure networks. Journal of Construction Engineering and Management, 130(2), 160–167. https://doi.org/10.1061/(ASCE)0733-9364(2004)130:2(160)
Hegazy, T., Abdel-Monem, M., & Atef Saad, D. (2014). Framework for enhanced progress tracking and control of linear projects. Engineering, Construction and Architectural Management, 21(1), 94–110. https://doi.org/10.1108/ECAM-08-2012-0080
Hegazy, T., Atef Saad, D., & Mostafa, K. (2020). Enhanced repetitive-scheduling computation and visualization. Journal of Construction Engineering and Management, 146(10), 04020118. https://doi.org/10.1061/(asce)co.1943-7862.0001911
Hejducki, Z. (2003). Scheduling model of construction activity with time couplings. Journal of Civil Engineering and Management, 9(4), 284–291. https://doi.org/10.1080/13923730.2003.10531341
Heravi, G., & Moridi, S. (2019). Resource-constrained time-cost tradeoff for repetitive construction projects. KSCE Journal of Civil Engineering, 23(8), 3265–3274. https://doi.org/10.1007/s12205-019-0151-x
Hsie, M., Chang, C.-J., Yang, I.-T., & Huang, C.-Y. (2009). Resource-constrained scheduling for continuous repetitive projects with time-based production units. Automation in Construction, 18(7), 942–949. https://doi.org/10.1016/j.autcon.2009.04.006
Hu, D., & Mohamed, Y. (2014). Simulation-model-structuring methodology for industrial construction fabrication shops. Journal of Construction Engineering and Management, 140(5), 04014002. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000825
Huang, Y.-C. (2006). Graphical-based multistage scheduling method for RC buildings. Construction Management and Economics, 24(1), 5–18. https://doi.org/10.1080/01446190500183743
Huang, R.-Y., & Halpin, D. W. (2000). Graphically based LP modelling for linear scheduling analysis: The POLO system. Engineering, Construction and Architectural Management, 7(1), 41–51. https://doi.org/10.1108/eb021131
Huang, R.-Y., & Sun, K.-S. (2005). System development for non-unit based repetitive project scheduling. Automation in Construction, 14(5), 650–665. https://doi.org/10.1016/j.autcon.2005.02.003
Huang, R.-Y., & Sun, K.-S. (2006a). An optimization model for workgroup-based repetitive scheduling. Canadian Journal of Civil Engineering, 33(9), 1172–1194. https://doi.org/10.1139/l06-057
Huang, R.-Y., & Sun, K.-S. (2006b). Non-unit-based planning and scheduling of repetitive construction projects. Journal of Construction Engineering and Management, 132(6), 585–597. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:6(585)
Huang, R.-Y., & Sun, K.-S. (2009). A GA optimization model for workgroup-based repetitive scheduling (WoRSM). Advances in Engineering Software, 40(3), 212–228. https://doi.org/10.1016/j.advengsoft.2008.01.010
Huang, Y., Zou, X., & Zhang, L. (2016). Genetic algorithm-based method for the deadline problem in repetitive construction projects considering soft logic. Journal of Management in Engineering, 32(4), 04016002. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000426
Hyari, K. H., & El-Rayes, K. (2006). Optimal planning and scheduling for repetitive construction projects. Journal of Management in Engineering, 22(1), 11–19. https://doi.org/10.1061/(ASCE)0742-597X(2006)22:1(11)
Hyari, K. H., El-Rayes, K., & El-Mashaleh, M. (2009). Automated trade-off between time and cost in planning repetitive construction projects. Construction Management and Economics, 27(8), 749–761. https://doi.org/10.1080/01446190903117793
Hyun, H., Jung, M., Yoon, I., Lee, H. S., & Lee, J. (2021). Multiple work zone strategy for repetitive on-site work of modular construction using parallel station method. Journal of Asian Architecture and Building Engineering, 20(3), 285–297. https://doi.org/10.1080/13467581.2020.1782917
Ioannou, P. G., & Yang, I.-T. (2016). Repetitive scheduling method: Requirements, modeling, and implementation. Journal of Construction Engineering and Management, 142(5), 04016002. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001107
Ipsilandis, P. G. (2007). Multiobjective linear programming model for scheduling linear repetitive projects. Journal of Construction Engineering and Management, 133(6), 417–424. https://doi.org/10.1061/(ASCE)0733-9364(2007)133:6(417)
Jaafari, A. (1984). Criticism of CPM for project planning analysis. Journal of Construction Engineering and Management, 110(2), 222–233. https://doi.org/10.1061/(ASCE)0733-9364(1984)110:2(222)
Jaśkowski, P., & Biruk, S. (2018). Reducing renewable resource demand fluctuation using soft precedence relations in project scheduling. Journal of Civil Engineering and Management, 24(4), 355–363. https://doi.org/10.3846/jcem.2018.3043
Jaśkowski, P., & Biruk, S. (2019). Minimizing the duration of repetitive construction processes with work continuity constraints. Computation, 7(1), 14. https://doi.org/10.3390/computation7010014
Jordan Srour, F., Kiomjian, D., & Srour, I. M. (2018). Automating the use of learning curve models in construction task duration estimates. Journal of Construction Engineering and Management, 144(7), 04018055. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001515
Kallantzis, A., Soldatos, J., & Lambropoulos, S. (2007). Linear versus network scheduling: A critical path comparison. Journal of Construction Engineering and Management, 133(7), 483–491. https://doi.org/10.1061/(ASCE)0733-9364(2007)133:7(483)
Kang, L. S., Park, I. C., & Lee, B. H. (2001). Optimal schedule planning for multiple, repetitive construction process. Journal of Construction Engineering and Management, 127(5), 382–390. https://doi.org/10.1061/(ASCE)0733-9364(2001)127:5(382)
Katsuragawa, C. M., Lucko, G., Isaac, S., & Su, Y. (2021). Fuzzy linear and repetitive scheduling for construction projects. Journal of Construction Engineering and Management, 147(3), 04021002. https://doi.org/10.1061/(asce)co.1943-7862.0001996
Kavanagh, D. P. (1985). Siren: A repetitive construction simulation model. Journal of Construction Engineering and Management, 111(3), 308–323. https://doi.org/10.1061/(ASCE)0733-9364(1985)111:3(308)
Lam, K. C., Lee, D., & Hu, T. (2001). Understanding the effect of the learning-forgetting phenomenon to duration of projects construction. International Journal of Project Management, 19(7), 411–420. https://doi.org/10.1016/S0263-7863(00)00025-9
Lee, J.-S. (2016). Estimating cumulative damages due to disruptions in repetitive construction. Journal of Construction Engineering and Management, 142(11), 1–11. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001184
Lee, H.-S., Roh, S., Park, M.-S., & Ryu, H.-G. (2010). Optimal option selection for finishing works of high-rise building. KSCE Journal of Civil Engineering, 14(5), 639–651. https://doi.org/10.1007/s12205-010-0904-z
Lee, D., Kim, D.-S., Kim, G.-H., & Kim, S. (2016). Time reduction effect of the enhanced TACT method for high-rise residential buildings. Journal of Civil Engineering and Management, 22(7), 944–953. https://doi.org/10.3846/13923730.2014.945949
Lee, S., Lee, S., & Son, J. (2016). Developing a process model for optimizing linear process plans based on three types of buffers and brute-force algorithm. Journal of Asian Architecture and Building Engineering, 15(2), 215–222. https://doi.org/10.3130/jaabe.15.215
Leu, S. S., & Hwang, S. T. (2001). Optimal repetitive scheduling model with shareable resource constraint. Journal of Construction Engineering and Management, 127(4), 270–280. https://doi.org/10.1061/(ASCE)0733-9364(2001)127:4(270)
Liu, S. S., & Wang, C. J. (2007). Optimization model for resource assignment problems of linear construction projects. Automation in Construction, 16(4), 460–473. https://doi.org/10.1016/j.autcon.2006.08.004
Liu, S. S., & Wang, C. J. (2009). Two-stage profit optimization model for linear scheduling problems considering cash flow. Construction Management and Economics, 27(11), 1023–1037. https://doi.org/10.1080/01446190903233111
Liu, S. S., & Wang, C. J. (2012). Optimizing linear project scheduling with multi-skilled crews. Automation in Construction, 24, 16–23. https://doi.org/10.1016/j.autcon.2011.12.009
Long, L. D., & Ohsato, A. (2009). A genetic algorithm-based method for scheduling repetitive construction projects. Automation in Construction, 18(4), 499–511. https://doi.org/10.1016/j.autcon.2008.11.005
Lu, M., & Li, H. (2003). Resource-activity critical-path method for construction planning. Journal of Construction Engineering and Management, 129(4), 412–420. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:4(412)
Lucko, G. (2008). Productivity scheduling method compared to linear and repetitive project scheduling methods. Journal of Construction Engineering and Management, 134(9), 711–720. https://doi.org/10.1061/(asce)0733-9364(2008)134:9(711)
Lucko, G. (2009). Productivity scheduling method: Linear schedule analysis with singularity functions. Journal of Construction Engineering and Management, 135(4), 246–253. https://doi.org/10.1061/(ASCE)0733-9364(2009)135:4(246)
Lucko, G. (2011a). Integrating efficient resource optimization and linear schedule analysis with singularity functions. Journal of Construction Engineering and Management, 137(1), 45–55. https://doi.org/10.1061/(asce)co.1943-7862.0000244
Lucko, G. (2011b). Optimizing cash flows for linear schedules modeled with singularity functions by simulated annealing. Journal of Construction Engineering and Management, 137(7), 523–535. https://doi.org/10.1061/(asce)co.1943-7862.0000324
Lucko, G., & Peña Orozco, A. A. (2009). Float types in linear schedule analysis with singularity functions. Journal of Construction Engineering and Management, 135(5), 368–377. https://doi.org/10.1061/(asce)co.1943-7862.0000007
Lucko, G., & Gattei, G. (2016). Line-of-balance against linear scheduling: Critical comparison. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 169(1), 26–44. https://doi.org/10.1680/jmapl.15.00016
Lucko, G., Alves, T. D. C. L., & Angelim, V. L. (2014a). Challenges and opportunities for productivity improvement studies in linear, repetitive, and location-based scheduling. Construction Management and Economics, 32(6), 575–594. https://doi.org/10.1080/01446193.2013.845305
Lucko, G., Said, H. M. M., & Bouferguene, A. (2014b). Construction spatial modeling and scheduling with three-dimensional singularity functions. Automation in Construction, 43, 132–143. https://doi.org/10.1016/j.autcon.2014.03.008
Lucko, G., Araújo, L. G., & Cates, G. R. (2016). Slip chart-inspired project schedule diagramming: origins, buffers, and extension to linear schedules. Journal of Construction Engineering and Management, 142(5), 04015101. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001089
Lutz, J. D., & Hijazi, A. (1993). Planning repetitive construction: Current practice. Construction Management and Economics, 11(2), 99–110. https://doi.org/10.1080/01446199300000003
Mahdi, I. M. (2004). A new LSM approach for planning repetitive housing projects. International Journal of Project Management, 22(4), 339–346. https://doi.org/10.1016/S0263-7863(03)00071-1
Maravas, A., & Pantouvakis, J.-P. (2011). Fuzzy repetitive scheduling method for projects with repeating activities. Journal of Construction Engineering and Management, 137(7), 561–564. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000319
Mattila, K. G., & Abraham, D. M. (1998). Resource leveling of linear schedules using integer linear programming. Journal of Construction Engineering and Management, 124(3), 232–244. https://doi.org/10.1061/(asce)0733-9364(1998)124:3(232)
Mattila, K. G., & Park, A. (2003). Comparison of linear scheduling model and repetitive scheduling method. Journal of Construction Engineering and Management, 129(1), 56–64. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:1(56)
Moreno, F., Orozco, F., Rojas, O., Senior, B. A., Poshdar, M., & Forcael, E. (2020). A fixed start scheduling approach for repetitive construction projects. KSCE Journal of Civil Engineering, 24, 1671–1682. https://doi.org/10.1007/s12205-020-1429-8
Moselhi, O., & El-Rayes, K. (1993a). Least cost scheduling for repetitive projects. Canadian Journal of Civil Engineering, 20(5), 834–843. https://doi.org/10.1139/l93-109
Moselhi, O., & El-Rayes, K. (1993b). Scheduling of repetitive projects with cost optimization. Journal of Construction Engineering and Management, 119(4), 681–697. https://doi.org/10.1061/(ASCE)0733-9364(1993)119:4(681)
Moselhi, O., & Hassanein, A. (2003). Optimized scheduling of linear projects. Journal of Construction Engineering and Management, 129(6), 664–673. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:6(664)
Moselhi, O., Bakry, I., & Alshibani, A. (2016). Accelerating repetitive construction projects: With uncertainty and contractors’ judgment. Canadian Journal of Civil Engineering, 43(11), 949–957. https://doi.org/10.1139/cjce-2014-0347
Murguia, D., & Urbina, A. (2018). Complex production systems: Non-linear and non-repetitive projects. In 26th Annual Conference of the International Group for Lean Construction (pp. 858–868), Chennai, India. https://doi.org/10.24928/2018/0222
Naresh, A. L., & Jahren, C. T. (1999). Learning outcomes from construction simulation modeling. Journal of Civil Engineering and Environmental Systems, 16(2), 129–144. https://doi.org/10.1080/02630259908970257
Nassar, K. (2005). Evolutionary optimization of resource allocation in repetitive construction schedules. Electronic Journal of Information Technology in Construction (ITcon), 10, 265–273.
O’Brien, J. J., Kreitzberg, F. C., & Mikes, W. F. (1985). Network scheduling variations for repetitive work. Journal of Construction Engineering and Management, 111(2), 105–116. https://doi.org/10.1061/(ASCE)0733-9364(1985)111:2(105)
Podolski, M. (2017). Management of resources in multiunit construction projects with the use of a tabu search algorithm. Journal of Civil Engineering and Management, 23(2), 263–272. https://doi.org/10.3846/13923730.2015.1073616
Podolski, M., & Sroka, B. (2019). Cost optimization of multiunit construction projects using linear programming and metaheuristic-based simulated annealing algorithm. Journal of Civil Engineering and Management, 25(8), 848–857. https://doi.org/10.3846/jcem.2019.11308
Radziszewska-Zielina, E., & Sroka, B. (2018). Planning repetitive construction projects considering technological constraints. Open Engineering, 8(1), 500–505. https://doi.org/10.1515/eng-2018-0058
Reda, R. M. (1990). RPM: Repetitive Project Modeling. Journal of Construction Engineering and Management, 116(2), 316–330. https://doi.org/10.1061/(ASCE)0733-9364(1990)116:2(316)
Rogalska, M., & Hejducki, Z. (2007). Time buffers in construction process scheduling. Journal of Civil Engineering and Management, 13(2), 143–148. https://doi.org/10.1080/13923730.2007.9636430
Rogalska, M., Bożejko, W., & Hejducki, Z. (2008). Time/cost optimization using hybrid evolutionary algorithm in construction project scheduling. Automation in Construction, 18(1), 24–31. https://doi.org/10.1016/j.autcon.2008.04.002
Roofigari-Esfahan, N., & Razavi, S. (2017). Uncertainty-aware linear schedule optimization: A space-time constraint-satisfaction approach. Journal of Construction Engineering and Management, 143(5), 04016132. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001276
Russell, A. D. (1985). Microcomputers, management, and high-rise construction: The next step. Canadian Journal of Civil Engineering, 12(2), 396–414. https://doi.org/10.1139/l85-042
Russell, A. D., & Caselton, W. F. (1988). Extensions to linear scheduling optimization. Journal of Construction Engineering and Management, 114(1), 36–52. https://doi.org/10.1061/(ASCE)0733-9364(1988)114:1(36)
Russell, A. D., & Wong, W. C. M. (1993). New generation of planning structures. Journal of Construction Engineering and Management, 119(2), 196–214. https://doi.org/10.1061/(ASCE)0733-9364(1993)119:2(196)
Russell, A., Staub-French, S., Tran, N., & Wong, W. (2009). Visualizing high-rise building construction strategies using linear scheduling and 4D CAD. Automation in Construction, 18(2), 219–236. https://doi.org/10.1016/j.autcon.2008.08.001
Salama, T., & Moselhi, O. (2019). Multi-objective optimization for repetitive scheduling under uncertainty. Engineering, Construction and Architectural Management, 26(7), 1294–1320. https://doi.org/10.1108/ECAM-05-2018-0217
Salama, T., Salah, A., & Moselhi, O. (2018). Integration of linear scheduling method and the critical chain project management. Canadian Journal of Civil Engineering, 45(1), 30–40. https://doi.org/10.1139/cjce-2017-0020
Sarraj, Z. M. A. (1990). Formal development of line-of-balance technique. Journal of Construction Engineering and Management, 116(4), 689–704. https://doi.org/10.1061/(ASCE)0733-9364(1990)116:4(689)
Sawhney, A., Mund, A., & Chaitavatputtiporn, T. (2003). Petri Net-based scheduling of construction projects. Civil Engineering and Environmental Systems, 20(4), 255–271. https://doi.org/10.1080/10286600310001633848
Senior, B. A., & Halpin, D. W. (1998). Simplified simulation system for construction projects. Journal of Construction Engineering and Management, 124(1), 72–81. https://doi.org/10.1061/(ASCE)0733-9364(1998)124:1(72)
Seuring, S., & Müller, M. (2008). From a literature review to a conceptual framework for sustainable supply chain management. Journal of Cleaner Production, 16(15), 1699–1710. https://doi.org/10.1016/j.jclepro.2008.04.020
Sharma, S., & Bansal, V. K. (2018). Location-based planning and scheduling of highway construction projects in hilly terrain using GIS. Canadian Journal of Civil Engineering, 45(7), 570–582. https://doi.org/10.1139/cjce-2017-0359
Sharma, H., McIntyre, C., Gao, Z., & Nguyen, T.-H. (2009). Developing a traffic closure integrated linear schedule for highway rehabilitation projects. Journal of Construction Engineering and Management, 135(3), 146–155. https://doi.org/10.1061/(asce)0733-9364(2009)135:3(146)
Shim, E., & Kim, B.-C. (2014). Batch-size based repetitive scheduling method (BRSM). International Journal of Construction Education and Research, 10(2), 140–156. https://doi.org/10.1080/15578771.2013.826753
Shtub, A., LeBlanc, L. J., & Cai, Z. (1996). Scheduling programs with repetitive projects: A comparison of a simulated annealing, a genetic and a pair-wise swap algorithm. European Journal of Operational Research, 88(1), 124–138. https://doi.org/10.1016/0377-2217(94)00158-8
Su, Y., & Lucko, G. (2016). Linear scheduling with multiple crews based on line-of-balance and productivity scheduling method with singularity functions. Automation in Construction, 70, 38–50. https://doi.org/10.1016/j.autcon.2016.05.011
Suhail, S. A., & Neale, R. H. (1994). CPM/LOB: New methodology to integrate CPM and line of balance. Journal of Construction Engineering and Management, 120(3), 667–684. https://doi.org/10.1061/(ASCE)0733-9364(1994)120:3(667)
Suresh, M., Dutta, P., & Jain, K. (2011). Analysis of an EPC project: A solution to the resource constrained project scheduling problem using genetic algorithms. International Journal of Industrial and Systems Engineering, 8(2), 251–269. https://doi.org/10.1504/IJISE.2011.041372
Tang, Y., Liu, R., & Sun, Q. (2014a). Schedule control model for linear projects based on linear scheduling method and constraint programming. Automation in Construction, 37, 22–37. https://doi.org/10.1016/j.autcon.2013.09.008
Tang, Y., Liu, R., & Sun, Q. (2014b). Two-stage scheduling model for resource leveling of linear projects. Journal of Construction Engineering and Management, 140(7), 04014022. https://doi.org/10.1061/(asce)co.1943-7862.0000862
Tang, Y., Sun, Q., Liu, R., & Wang, F. (2018). Resource leveling based on line of balance and constraint programming. Computer-Aided Civil and Infrastructure Engineering, 33(10), 864–884. https://doi.org/10.1111/mice.12383
Tao, S., Wu, C., Sheng, Z., & Wang, X. (2018). Space-time repetitive project scheduling considering location and congestion. Journal of Computing in Civil Engineering, 32(3), 04018017. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000745
Thabet, W. Y., & Beliveau, Y. J. (1994a). Modeling work space to schedule repetitive floors in multistory buildings. Journal of Construction Engineering and Management, 120(1), 96–116. https://doi.org/10.1061/(ASCE)0733-9364(1994)120:1(96)
Thabet, W. Y., & Beliveau, Y. J. (1994b). HVLS: Horizontal and vertical logic scheduling for multistory projects. Journal of Construction Engineering and Management, 120(4), 875–892. https://doi.org/10.1061/(ASCE)0733-9364(1994)120:4(875)
Thabet, W. Y., & Beliveau, Y. J. (1997). SCaRC: Space-Constrained Resource-Constrained scheduling system. Journal of Computing in Civil Engineering, 11(1), 48–59. https://doi.org/10.1061/(ASCE)0887-3801(1997)11:1(48)
Tokdemir, O. B., Arditi, D., & Balcik, C. (2006). ALISS: Advanced Linear Scheduling System. Construction Management and Economics, 24(12), 1253–1267. https://doi.org/10.1080/01446190600953706
Tokdemir, O. B., Erol, H., & Dikmen, I. (2019). Delay risk assessment of repetitive construction projects using line-of-balance scheduling and Monte Carlo simulation. Journal of Construction Engineering and Management, 145(2), 04018132. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001595
Tomar, A., & Bansal, V. K. (2019). Scheduling of repetitive construction projects using geographic information systems: an integration of critical path method and line of balance. Asian Journal of Civil Engineering, 20(4), 549–562. https://doi.org/10.1007/s42107-019-00123-3
Tomar, A., & Bansal, V. K. (2020). A Novel Step Toward Repetitive Projects Scheduling Using Geographic Information Systems. Arabian Journal for Science and Engineering, 45(5), 3983–3997. https://doi.org/10.1007/s13369-019-04330-7
Tomar, A., & Bansal, V. K. (2022). Generation, visualization, and evaluation schedule of repetitive construction projects using GIS. International Journal of Construction Management, 22(6), 1104–1119. https://doi.org/10.1080/15623599.2019.1683691
Tomczak, M. (2019). Modeling of the harmonization method for executing a multi-unit construction project. Open Engineering, 9(1), 282–291. https://doi.org/10.1515/eng-2019-0036
Tomczak, M., & Jaśkowski, P. (2020). New approach to improve general contractor crew’s work continuity in repetitive construction projects. Journal of Construction Engineering and Management, 146(5), 04020043. https://doi.org/10.1061/(asce)co.1943-7862.0001824
Tomczak, M., & Jaśkowski, P. (2021). Preferences of construction managers regarding the quality and optimization criteria of project schedules. Sustainability, 13(2), 544. https://doi.org/10.3390/su13020544
Tran, D.-H., Luong, D.-L., Duong, M.-T., Le, T.-N., & Pham, A.-D. (2018). Opposition multiple objective symbiotic organisms search (OMOSOS) for time, cost, quality and work continuity tradeoff in repetitive projects. Journal of Computational Design and Engineering, 5(2), 160–172. https://doi.org/10.1016/j.jcde.2017.11.008
Tran, D.-H., Chou, J.-S., & Luong, D.-L. (2019). Multi-objective symbiotic organisms optimization for making time-cost tradeoffs in repetitive project scheduling problem. Journal of Civil Engineering and Management, 25(4), 322–339. https://doi.org/10.3846/jcem.2019.9681
Tran, D.-H., Chou, J.-S., & Luong, D.-L. (2020). Optimizing non-unit repetitive project resource and scheduling by evolutionary algorithms. Operational Research, 22, 77–103. https://doi.org/10.1007/s12351-019-00544-7
Ungureanu, L. C., Hartmann, T., & Serbanoiu, I. (2019). Quantitative lean assessment of line of balance schedules’ quality. Engineering, Construction and Architectural Management, 26(2), 224–244. https://doi.org/10.1108/ECAM-05-2017-0088
Vanhoucke, M. (2006). Work continuity constraints in project scheduling. Journal of Construction Engineering and Management, 132(1), 14–25. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:1(14)
Wang, C.-H., & Huang, Y.-C. (1998). Controlling activity interval times in LOB scheduling. Construction Management and Economics, 16(1), 5–16. https://doi.org/10.1080/014461998372547
Wang, T., Abdallah, M., Clevenger, C., & Monghasemi, S. (2021). Time–cost–quality trade-off analysis for planning construction projects. Engineering, Construction and Architectural Management, 28(1), 82–100. https://doi.org/10.1108/ECAM-12-2017-0271
Yamín, R. A., & Harmelink, D. J. (2001). Comparison of Linear Scheduling Model (LSM) and Critical Path Method (CPM). Journal of Construction Engineering and Management, 127(5), 374–381. https://doi.org/10.1061/(asce)0733-9364(2001)127:5(374)
Yang, I.-T., & Ioannou, P. G. (2004). Scheduling system with focus on practical concerns in repetitive projects. Construction Management and Economics, 22(6), 619–630. https://doi.org/10.1080/01446190310001649065
Yang, I.-T., & Chang, C.-Y. (2005). Stochastic resource-constrained scheduling for repetitive construction projects with uncertain supply of resources and funding. International Journal of Project Management, 23(7), 546–553. https://doi.org/10.1016/j.ijproman.2005.03.003
Yi, K. J., Lee, H.-S., & Choi, Y. K. (2002). Network creation and development for repetitive-unit projects. Journal of Construction Engineering and Management, 128(3), 257–264. https://doi.org/10.1061/(ASCE)0733-9364(2002)128:3(257)
Zhang, L., & Qi, J. (2012). Controlling path and controlling segment analysis in repetitive scheduling method. Journal of Construction Engineering and Management, 138(11), 1341–1345. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000535
Zhang, H., Tam, G. M., & Shi, J. J. (2002). Simulation-based methodology for project scheduling. Construction Management and Economics, 20(8), 667–678. https://doi.org/10.1080/0144619022000014088
Zhang, H., Li, H., & Tam, C. M. (2006). Heuristic scheduling of resource-constrained, multiple-mode and repetitive projects. Construction Management and Economics, 24(2), 159–169. https://doi.org/10.1080/01446190500184311
Zhang, L., Zou, X., & Chen, X. (2012). Resource-constrained scheduling in repetitive projects. Advances in Information Sciences and Service Sciences, 4(14), 287–294. https://doi.org/10.4156/aiss.vol4.issue14.35
Zhang, L., Zou, X., & Kan, Z. (2014). Improved strategy for resource allocation in repetitive projects considering the learning effect. Journal of Construction Engineering and Management, 140(11), 04014053. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000896
Zhang, L., Zou, X., & Qi, J. (2015). A trade-off between time and cost in scheduling repetitive construction projects. Journal of Industrial and Management Optimization, 11(4), 1423–1434. https://doi.org/10.3934/jimo.2015.11.1423
Zhang, L., Dai, G., Zou, X., & Qi, J. (2020). Robustness-based multi-objective optimization for repetitive projects under work continuity uncertainty. Engineering, Construction and Architectural Management, 27(10), 3095–3113. https://doi.org/10.1108/ECAM-08-2019-0458
Zolfaghar Dolabi, H. R., Afshar, A., & Abbasnia, R. (2014). CPM/LOB scheduling method for project deadline constraint satisfaction. Automation in Construction, 48, 107–118. https://doi.org/10.1016/j.autcon.2014.09.003
Zou, X., & Zhang, L. (2020). A constraint programming approach for scheduling repetitive projects with atypical activities considering soft logic. Automation in Construction, 109, 102990. https://doi.org/10.1016/j.autcon.2019.102990
Zou, X., Fang, S.-C., Huang, Y.-S., & Zhang, L. (2017). Mixed-integer linear programming approach for scheduling repetitive projects with time-cost trade-off consideration. Journal of Computing in Civil Engineering, 31(3), 06016003. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000641
Zou, X., Wu, G., & Zhang, Q. (2021). Work continuity constraints in repetitive project scheduling considering soft logic. Engineering, Construction and Architectural Management, 28(6), 1713–1738. https://doi.org/10.1108/ECAM-11-2019-0595