This paper deals with the process of traction force realization described by a suitable mechanical model and is pointed to the adhesion phenomenon as a physical one, i.e. is a suitable factor that the value of traction force depends on. The model for the process of optimizing locomotive traction force based on using the fuzzy set theory is explained. The projecting process of a fuzzy controller regulating the value of skidding and the value of traction torque by increasing the value of traction force that can be realized according to adhesion conditions is described. Finally, testing the optimization model in several numerical examples under specific conditions of wheel-rail adhesion is done.
Djukić, M., Rusov, S., & Mitrović, Z. (2010). A fuzzy model for an increase in locomotive traction force. Transport, 25(1), 36-45. https://doi.org/10.3846/transport.2010.06
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
